Airtec series

Applications

• Coating of shaped surfaces with 3D thermoforming films (PVC, PPE, ABS etc.); this operation can be carried out with or without membrane depending on the case, (the press is equipped with a mechanical system that allows the operator to put on/take off the membrane very quickly);
• Coating of shaped surfaces with veneer (this operation always requires the use of the membrane).

Typical final products

• Various types of shaped panels;
• Doors, cabinet doors and flaps for bathrooms, kitchens etc.

Common features of Airtec models

• Solid steel platens
  Maximum working temperature: 250°C.
  Maximum specific working pressure 30 kg/cm².
  Our solid steel platens are manufactured in our own metal workshop with numerically controlled machines; the platens are made of steel plates drilled with holes for oil circulation;

• Types of heating systems
  Oil boiler – maximum oil temperature 120°C (customizable to higher temperatures)
  Heating Fluid – Diathermic oil;

• Control panel
  The press is equipped with a “touch screen” digital control panel;

• Compliance
  The presses manufactured by OMC Machinery comply with the EC Machinery Directive 2006/42/EC.

Accessories/Options

Our AIRTEC presses can be equipped with the following accessories:

• PVC unwinding trolley with manual cutting system;
• PVC unwinding trolley with pneumatic cutting system;
• Partitioning bar for the loading system;
• JIG System 25/14 (magnetic);
• JIG System 30/14 (magnetic);
• JIG System 25/14 (electronic);
• JIG System 30/14 (electronic);
• Antistatic brush (1400 mm);
• System to process glossy PVC: intermediate flange, dedicated software and silicone membrane;
• Modular chamber h 90 mm;
• Modular chamber h 180 mm;
• Modular chamber h 180 mm;
• Surface cleaning system for glossy PVC;
• PVC granulator;
• PVC tensioning device;
• Tray scanning device with PVC tensioning and cutting system;
• Rotating stocking unit for 10 PVC rolls;
• Tilting unloading table with suction cups and motorized roller conveyor.

Applications:

This membrane press is equipped with an aluminum tray to coat one side of the workpieces with 3D thermoforming films and veneer.
This model is equipped with a strong pneumatic system and a sturdy structure made of oxy-cut steel sheets, in order to coat the most demanding surfaces.

Models:

Airtec CM: MANUAL loading onto the long side

• Airtec CM 1 comes with 1 manual tray;
• Airtec CM 2 comes with 2 manual trays.

Useful dimensions and hydraulic thrust

• Airtec CM 16/08: 1600×800 mm, 4 + 1 Kg/cm^2c ;
• Airtec CM 24/09: 2400×900 mm, 6 + 1 Kg/cm².

Standard equipment

• 1 rubber membrane;
• Heating system with diathermic oil;
• 1 proportional control valve + 500 litre air tank;
• 1 vacuum pump with 500 litre tank.

Applications:

This membrane press is equipped with an aluminum tray to coat one side of the workpieces with 3D thermoforming films and veneer.
This model is equipped with a strong pneumatic system and a sturdy structure made of oxy-cut steel sheets, in order to coat the most demanding surfaces.

Models and loading

Airtec CA: AUTOMATIC loading onto the short side

• AIRTEC CA is equipped with 1 tray;
• AIRTEC CA-2V is equipped with 2 trays;
• AIRTEC CA-3V is equipped with 3 trays;

Useful dimensions and thrust

• Airtec CA 25/14: 2340×1280 mm, 8+1 Kg/cm²;
• Airtec CA 30/14: 2840×1280 mm, 8+1 Kg/cm².

Standard equipment

• 1 rubber membrane;
• heating system with Diathermic oil;
• 1 proportional control valve + 500 litre air tank;
• 1 vacuum pump with 500 litre tank.

This membrane press is equipped with an aluminum tray to coat both sides of the workpieces with 3D thermoforming films and veneer.
This model is equipped with a strong pneumatic system and a structure made of oxy-cut steel sheets in order to coat particularly demanding surfaces.

Models

• “Airtec Double up”: downstroke press with motorized loading table with belt conveyor;
• “Airtec Double down”: upstroke press with motorized loading table with belt conveyor;

Useful dimensions and hydraulic thrust

• 30/42: 2550×1250 mm, 8 Kg/cm².

Standard equipment

• 2 rubber membranes;
• Heating system with diathermic oil;
• 2 proportional control valves + 2 500-liter air tanks.